Power Tool Accessories

• Suitable for use with sheet metal, cast iron, aluminium, wood, plywood, plastics and pipe
• Ensure the recommended speed is used for different diameters of holesaw
• Use the correct cutting fluid when making holes in metal, other than cast iron which should be cut dry
• Use correct level of pressure when hole cutting. Too much or too little can damage cutting edges
• Pilot drills should be correctly assembled to ensure they do not extend beyond cutting teeth further than the material thickness being cut

• For drilling the hardest tiles and materials such as PEI class 5 porcelain, ceramics, fine stoneware, marble, concrete, engineering brick and even granite
• The drill bit works best at low revolution speeds
• Drill machines with a variable speed trigger will achieve the best results
• The drill bit should be used on the rotary setting and must not be used on the hammer setting

Olympic SDS Hammer Drill Bits incorporate Tungsten Carbide tips conforming to DIN 8035.They are suitable for all hammer drilling machines with SDS+ drive system, supplied individually on plastic hanging clips

• Designed for drilling metal but also gives good results in materials such as wood, chipboard, hardboard, plastics & plasterboard

Olympic HSS Twist Drills is a high performance product with 5% cobalt added for higher heat resistance. They conform to BS 328 & DIN 338 and have fully ground flutes with 135° split point to help centre the drill. Supplied individually in hanging blister packs.

Olympic Twist Drills are manufactured in a roll forged, black finish with a straight shank conforming to BS 328 & DIN 338.They are designed to be used in fast rotating drilling machines and are supplied in hanging telescopic cases.