Tools Fixings & Hardware

Olympic Hexagon Head Washered Drillers are manufactured to DIN 7504K and are steel to steel fixings. They are made from C1022 case hardened steel with an EPDM galvanised steel washer and are bright zinc plate finished. Ideal for fixing cladding and corrugated sheet metal to steel construction.

Olympic Twist Drills are manufactured in a roll forged, black finish with a straight shank conforming to BS 328 & DIN 338.They are designed to be used in fast rotating drilling machines and are supplied in hanging telescopic cases.

Olympic SDS Hammer Drill Bits incorporate Tungsten Carbide tips conforming to DIN 8035.They are suitable for all hammer drilling machines with SDS+ drive system, supplied individually on plastic hanging clips

Olympic Bi-Metal Holesaws are made with M42 HSS cutting edge consisting of 8% cobalt. The body is manufactured from premium quality steel with a 4/6 TPI tooth pattern with a 38mm cutting depth. They are supplied individually in hanging blister packs

Olympic Concrete Screws are a grade 8.8 self tapping anchor that will give a high performance in a variety of solid and hollow materials. They are produced from high quality carbon steel and are zinc plated and yellow passivated. The threading action provides a positive and safe anchorage, simple to install and can be removed and re-fixed

• Designed for drilling metal but also gives good results in materials such as wood, chipboard, hardboard, plastics & plasterboard

• Suitable for drilling into hard materials such as concrete, rock, brick, stone and granite
• Heavy Duty Drilling

Olympic Concrete Frame Screws is a heavy duty self tapping screw for fixing directly into masonry and concrete. They have shallow countersunk heads with Torx T-30 recess, high/low thread design and are zinc plated and yellow passivated. Screws into a pre-drilled hole without the need of a wall plug and will cut its own thread.

Olympic Concrete Frame Screws is a heavy duty self tapping screw for fixing directly into masonry and concrete. They have shallow countersunk heads with Torx T-30 recess, high/low thread design and are zinc plated and yellow passivated. Screws into a pre-drilled hole without the need of a wall plug and will cut its own thread.

Olympic Concrete Frame Screws is a heavy duty self tapping screw for fixing directly into masonry and concrete. They have shallow countersunk heads with Torx T-30 recess, high/low thread design and are zinc plated and yellow passivated. Screws into a pre-drilled hole without the need of a wall plug and will cut its own thread.

Olympic Concrete Frame Screws is a heavy duty self tapping screw for fixing directly into masonry and concrete. They have shallow countersunk heads with Torx T-30 recess, high/low thread design and are zinc plated and yellow passivated. Screws into a pre-drilled hole without the need of a wall plug and will cut its own thread.

• Supplied in hanging blister packs

• Suitable for use with sheet metal, cast iron, aluminium, wood, plywood, plastics and pipe
• Ensure the recommended speed is used for different diameters of holesaw
• Use the correct cutting fluid when making holes in metal, other than cast iron which should be cut dry
• Use correct level of pressure when hole cutting. Too much or too little can damage cutting edges
• Pilot drills should be correctly assembled to ensure they do not extend beyond cutting teeth further than the material thickness being cut

Olympic Bi-Metal Holesaws are made with M42 HSS cutting edge consisting of 8% cobalt. The body is manufactured from premium quality steel with a 4/6 TPI tooth pattern with a 38mm cutting depth. They are supplied individually in hanging blister packs

• Suitable for use with sheet metal, cast iron, aluminium, wood, plywood, plastics and pipe
• Ensure the recommended speed is used for different diameters of holesaw
• Use the correct cutting fluid when making holes in metal, other than cast iron which should be cut dry
• Use correct level of pressure when hole cutting. Too much or too little can damage cutting edges
• Pilot drills should be correctly assembled to ensure they do not extend beyond cutting teeth further than the material thickness being cut

• Suitable for use with sheet metal, cast iron, aluminium, wood, plywood, plastics and pipe
• Ensure the recommended speed is used for different diameters of holesaw
• Use the correct cutting fluid when making holes in metal, other than cast iron which should be cut dry
• Use correct level of pressure when hole cutting. Too much or too little can damage cutting edges
• Pilot drills should be correctly assembled to ensure they do not extend beyond cutting teeth further than the material thickness being cut