Robus

GOLF SLIM MODULAR offers tripple wattage allowing selection between 12W 15W and 18W outputs. CCT swith on the LED tray allows selection between 3000K 4000K and 6500K. Slim profile with a height of only 50mm. High impact resistant polycarbonate/ABS housing providing an Impact Rating of IK08. Can be easily converted to emergency or sensor version using plug and play accessories: emergency pack RMSEM-PSU and microwave with corridor fucntion RMSCRS-01

Accelerate every step of your installation with HARBOUR Express. Featuring a unique design allowing switching between 16W, 20W, 26W or 32W and CCT selectable between 4000K, 5000K or 6500K colour temperature to suit requirement of any project. The IK10 rating insures very high impact protection. Boasting a high efficacy of up to 165lm/W and the perfect LED replacement for 2x to 4x 18W fluorescent corrosion proof fittings. The IP66 rating makes it ideal for workshops, garages, warehouses, car parks, farm buildings, wet areas. Wide ambient temperature operation range of -20°C +40°C. Suitable for switching by PIR, Microwave or Photocell.

Available for collection only.

• Suitable for workshops, garages, warehouses, car parks, farm buildings, wet areas
• LED replacement for 2 x 58W fluorescent corrosion proof fitting
• 50,000 hour average lamp life
• Polycarbonate housing and the diffuser providing high impact protection rating of IK08
• Complete with stainless steel clips and screws
• Can easily be converted to emergency using RLEMPKDT-PSU sold as an accessory
• Plug and play microwave sensor available as an accessory (RLMW)
• High efficacy of 123lm/W
• Wide ambient temperature operation range of -20°C +40°C
• Suitable for switching by PIR, Microwave or Photocell

* HILUME is an extensive range of floods from 10W to 100W this means that almost any small to medium size application can be catered for with the lumen packages in the range *A high quality powder coat process electrostatically applied to the die-cast aluminium body ensures that the fitting looks good and will continue to do so after being subjected to the rigours of the UK weather for years to come *A tempered glass frosted diffuser is used to provide an anti-vandal, low glare uniform light coverage of the area *A beam angle of 100 degrees ensures that good illumination of the area is achieved for vehicular or pedestrian access *PIR versions are available in all lumen packages except the 100W for additional energy savings which ensures lighting is only when required *A pre-drilled angled stirrup mounting bracket allows the position of mounting holes to be marked, drilled and the fitting fixed to the surface without removing the bracket from the fitting *The fitting is pre-wired to allow termination into a junction box which avoids the possibility of the IP rating being compromised during on-site connection

* HILUME is an extensive range of floods from 10W to 100W this means that almost any small to medium size application can be catered for with the lumen packages in the range *A high quality powder coat process electrostatically applied to the die-cast aluminium body ensures that the fitting looks good and will continue to do so after being subjected to the rigours of the UK weather for years to come *A tempered glass frosted diffuser is used to provide an anti-vandal, low glare uniform light coverage of the area *A beam angle of 100 degrees ensures that good illumination of the area is achieved for vehicular or pedestrian access *PIR versions are available in all lumen packages except the 100W for additional energy savings which ensures lighting is only when required *A pre-drilled angled stirrup mounting bracket allows the position of mounting holes to be marked, drilled and the fitting fixed to the surface without removing the bracket from the fitting *The fitting is pre-wired to allow termination into a junction box which avoids the possibility of the IP rating being compromised during on-site connection

* HILUME is an extensive range of floods from 10W to 100W this means that almost any small to medium size application can be catered for with the lumen packages in the range *A high quality powder coat process electrostatically applied to the die-cast aluminium body ensures that the fitting looks good and will continue to do so after being subjected to the rigours of the UK weather for years to come *A tempered glass frosted diffuser is used to provide an anti-vandal, low glare uniform light coverage of the area *A beam angle of 100 degrees ensures that good illumination of the area is achieved for vehicular or pedestrian access *PIR versions are available in all lumen packages except the 100W for additional energy savings which ensures lighting is only when required *A pre-drilled angled stirrup mounting bracket allows the position of mounting holes to be marked, drilled and the fitting fixed to the surface without removing the bracket from the fitting *The fitting is pre-wired to allow termination into a junction box which avoids the possibility of the IP rating being compromised during on-site connection