Non-Corrosive Fittings

Available for collection only.

Robus Plug-In Microwave and 3 Step Dimming Sensor For Harbour Express Fitting suitable for non-corrosive fittings. Key features include plug and play microwave for use with HARBOUR EXPRESS range; two operating modes allowing sensor to work as on-off switch or PWM dimming; and maximum mounting height of 5m.

Robus Harbour Express 25W - 50W 5ft LED CCT Selectable Non Corrosive Fitting suitable for non-corrosive fittings. Key features include lED NCF, ideal for retrofit of existing T5 or T8 fittings; wattage selectable [25W / 33W / 42W / 50W]; and colour selectable [4000K / 5000K / 6500K].

Accelerate every step of your installation with HARBOUR Express. Featuring a unique design allowing switching between 16W, 20W, 26W or 32W and CCT selectable between 4000K, 5000K or 6500K colour temperature to suit requirement of any project. The IK10 rating insures very high impact protection. Boasting a high efficacy of up to 165lm/W and the perfect LED replacement for 2x to 4x 18W fluorescent corrosion proof fittings. The IP66 rating makes it ideal for workshops, garages, warehouses, car parks, farm buildings, wet areas. Wide ambient temperature operation range of -20°C +40°C. Suitable for switching by PIR, Microwave or Photocell.

Robus Harbour Express 8W - 16W 2ft LED CCT Selectable Non Corrosive Fitting suitable for non-corrosive fittings. Key features include lED NCF, ideal for retrofit of existing T5 or T8 fittings; wattage selectable [8W / 10W / 13W / 16W]; and colour selectable [4000K / 5000K / 6500K].

Available for collection only.

• Suitable for workshops, garages, warehouses, car parks, farm buildings, wet areas
• LED replacement for 2 x 58W fluorescent corrosion proof fitting
• 50,000 hour average lamp life
• Polycarbonate housing and the diffuser providing high impact protection rating of IK08
• Complete with stainless steel clips and screws
• Can easily be converted to emergency using RLEMPKDT-PSU sold as an accessory
• Plug and play microwave sensor available as an accessory (RLMW)
• High efficacy of 123lm/W
• Wide ambient temperature operation range of -20°C +40°C
• Suitable for switching by PIR, Microwave or Photocell

* Plug and play microwave sensor for the HARBOUR VE and DUO ranges * Maximum mounting height of 5m * Maximum detection range of 10m * Detection angle of 360º * Adjustable detection range of 50% or 100% * Adjustable hold duration of 5s to 10 min * Adjustable lux settings of 2 lux to 50 lux or disabled * Standby power 0.5W * LED load max 400W

Tamco 70 to 125W Starter Switch suitable for non-corrosive fittings. Key features include starter replacement recommended when replacing fluorescent lamps; and suitable for all lamps 75 - 125W.

Available for collection only.

Accelerate every step of your installation with HARBOUR Express. Featuring a unique design allowing switching between 30W, 40W, 50W or 60W and CCT selectable between 4000K, 5000K or 6500K colour temperature to suit requirement of any project. The IK10 rating insures very high impact protection. Boasting a high efficacy of up to 165lm/W and the perfect LED replacement for 2x to 4x 18W fluorescent corrosion proof fittings. The IP66 rating makes it ideal for workshops, garages, warehouses, car parks, farm buildings, wet areas. Wide ambient temperature operation range of -20°C +40°C. Suitable for switching by PIR, Microwave or Photocell.